Model of Processor

( Select your Model )

          FP1,  SK4.3,   SK8.3,  SK8R.3,  SK4G,   SK4H,

  SK8G, SK8H,  SK8RH,  SSK4H,   SSK8RH

Back To

ssk.gif (4719 bytes)

Go to
Support Page Film Diagnostics

 

 

 

FP-1 or SK4.3   

  1. Leaking from Processing drum
  2. Water Leaking from under unit
  3. First couple of frames not developed.
  4. Does not Start,(wont go passed Initializing)
  5. Stuck in process
  6. Stuck in process, (pump still running, drum bubbling from front)
  7. Rotate motor stops
  8. Not loading one of the solutions in unit (alarm sounds)
  9. Unit doesn't recognize two roll drum
  10. Unit doesn't recognize four roll drum
  11. Display problems
  12. Stuck in process, display blinks"heat on, heating"
  13. Stuck in "Flush"
  14. Machine Failure
  15. Machine will not stop pumping up solution
  16. Only half the roll develops
  17. 120/220 fill comes off during process

(top)

SK8.3 or SK8R.3

  1. Leaking from Processing drum
  2. Water Leaking from under unit
  3. First couple of frames not developed.
  4. Does not Start,(wont go passed Initializing)
  5. Stuck in process
  6. Stuck in process, (pump still running, drum bubbling from front)
  7. Rotate motor stops
  8. Not loading one of the solutions in unit (alarm sounds)
  9. Unit doesn't recognize eight roll drum
  10. Unit doesn't recognize four roll drum
  11. Display problems
  12. Stuck in process, display blinks"heat on, heating"
  13. Stuck in "Flush"
  14. Only half the roll develops
  15. Processing drum starts to count down
  16. Machine Failure
  17. Machine will not stop pumping up solution
  18. 120/220 fill comes off during process

(top)

SK4G , SK4H

  1. Leaking from Processing drum
  2. Water Leaking from under unit
  3. First couple of frames not developed.
  4. Does not Start,(wont go passed Initializing)
  5. Stuck in process
  6. Stuck in process, (pump still running, drum bubbling from front)
  7. Rotate motor stops
  8. Not loading one of the solutions in unit (alarm sounds)
  9. Unit doesn't recognize two roll drum
  10. Unit doesn't recognize four roll drum
  11. Display problems
  12. Stuck in process, display blinks"heat on, heating"
  13. Stuck in "Flush"
  14. Machine Failure
  15. Machine will not stop pumping up solution
  16. Only half the roll develops
  17. 120/220 fill comes off during process

(top)

 

SK8G, SK8H, SK8RH,

  1. Leaking from Processing drum
  2. Water Leaking from under unit
  3. First couple of frames not developed.
  4. Does not Start,(wont go passed Initializing)
  5. Stuck in process
  6. Stuck in process, (pump still running, drum bubbling from front)
  7. Rotate motor stops
  8. Not loading one of the solutions in unit (alarm sounds)
  9. Unit doesn't recognize eight roll drum
  10. Unit doesn't recognize four roll drum
  11. Display problems
  12. Stuck in process, display blinks"heat on, heating"
  13. Stuck in "Flush"
  14. Only half the roll develops
  15. Processing drum starts to count down
  16. Machine Failure
  17. Machine will not stop pumping up solution
  18. 120/220 fill comes off during process

(top)

SSK4H,

  1. Leaking from Processing drum
  2. Water Leaking from under unit
  3. First couple of frames not developed.
  4. Does not Start,(wont go passed Initializing)
  5. Stuck in process
  6. Stuck in "Flush", Unit goes into alarm
  7. Not loading one of the solutions in unit (alarm sounds)
  8. Unit Displays "Diagnostic Tech" after drum  is inserted
  9. Display problems
  10. Stuck in process, display blinks"heat on, heating"
  11. Rotate motor stops
  12. Only half the roll develops
  13. Processing drum starts to count down
  14. Machine Failure
  15. Machine will not stop pumping up solution
  16. Error 1 message
  17. Error 2 message
  18. Clean drum sens
  19. Clean level sensrs
  20. Repl fill pump
  21. "Wait for AC"
  22. 120/220 fill comes off during process

(top)

SSK8RH

  1. Leaking from Processing drum
  2. Water Leaking from under unit
  3. First couple of frames not developed.
  4. Does not Start,(wont go passed Initializing)
  5. Stuck  in process
  6. Stuck in "Flush", Unit goes into alarm
  7. Not loading one of the solutions in unit (alarm sounds)
  8. Unit Displays "Diagnostic Tech" after drum  is inserted
  9. Display problems
  10. Stuck in process, display blinks"heat on, heating"
  11. Rotate motor stops
  12. Only half the roll develops
  13. Processing drum starts to count down
  14. Machine Failure
  15. Machine will not stop pumping up solution
  16. Error 1 message
  17. Error 2 message
  18. Clean drum sens
  19. Clean level sensrs
  20. Repl fill pump
  21. "Wait for AC"
  22. 120/220 fill comes off during process

(top)